# item.guide
Side-by-Side Comparison Display Cables

DisplayPort 1.0 vs. VGA

Comparing 2 standards across 6 specifications. 6 key differences identified.

Comparing:
DisplayPort 1.0
VGA

DisplayPort 1.0, approved by VESA on May 3, 2006, was the original version of the royalty-free digital display standard. Its High Bit Rate (HBR) mode delivered 10.8 Gbps raw bandwidth across 4 lanes, with hot-plug detection and embedded digital audio built in from the start.

View full DisplayPort 1.0 spec sheet →

VGA (Video Graphics Array) uses a 15-pin DE-15 D-subminiature connector, introduced by IBM in 1987 alongside the original PS/2 computer. As a purely analog standard with no enforced resolution ceiling, its practical maximum depends on cable and DAC quality, though 2048x1536 @ 85Hz is commonly cited as a practical limit.

View full VGA spec sheet →

Specification Comparison Table

6 Parameters
Parameter / Spec
Approved
May 3, 2006 (VESA)
Max Bandwidth, HBR 4 lanes (raw / effective)
10.8 / 8.64 Gbps
Link Rates
RBR: 1.62 Gbps/lane | HBR: 2.70 Gbps/lane
Connector
DE-15 (15-pin D-subminiature, 3 rows of 5)
Introduced
1987 (IBM)
Commonly Cited Practical Max Resolution
2048x1536 @ 85Hz