DisplayPort 1.0 vs. HDMI 1.0
Comparing 2 standards across 7 specifications. 7 key differences identified.
DisplayPort 1.0, approved by VESA on May 3, 2006, was the original version of the royalty-free digital display standard. Its High Bit Rate (HBR) mode delivered 10.8 Gbps raw bandwidth across 4 lanes, with hot-plug detection and embedded digital audio built in from the start.
HDMI 1.0, released December 9, 2002 by a group of seven consumer electronics companies, was the original single-cable digital audio/video connector. It carried up to 4.95 Gbps over TMDS signaling -- enough for 1080p at 60Hz -- replacing separate analog video and digital audio cables with one connector.
Specification Comparison Table
7 Parameters| Parameter / Spec | ||
|---|---|---|
|
Approved
|
May 3, 2006 (VESA) | — |
|
Max Bandwidth, HBR 4 lanes (raw / effective)
|
10.8 / 8.64 Gbps | — |
|
Link Rates
|
RBR: 1.62 Gbps/lane | HBR: 2.70 Gbps/lane | — |
|
Release Date
|
— | December 9, 2002 |
|
Max Bandwidth (raw / video)
|
— | 4.95 / 3.96 Gbps |
|
Max Resolution @ Refresh Rate
|
— | 1920x1080 or 1920x1200 @ 60Hz |
|
Max Audio
|
— | 8-channel LPCM, 192kHz/24-bit |