# item.guide
Side-by-Side Comparison Jack Connectors

2.5mm TRRS vs. XLR 4-Pin

Comparing 2 standards across 10 specifications. 10 key differences identified.

Comparing:
2.5mm TRRS
XLR 4-Pin

2.5mm TRRS adds a microphone conductor to the 2.5mm TRS jack, following the same CTIA or OMTP wiring conventions as 3.5mm TRRS. It served as a mobile phone headset jack -- including on older Nokia handsets -- before 3.5mm became the universal smartphone headset size.

View full 2.5mm TRRS spec sheet →

4-pin XLR uses the same connector shell as standard 3-pin XLR but carries entirely different, incompatible signals depending on the equipment: intercom headsets, balanced headphone outputs, or 12V DC power -- with no universal standard or keying to prevent connecting the wrong device to the wrong port.

View full XLR 4-Pin spec sheet →

Specification Comparison Table

10 Parameters
Parameter / Spec
Connector Family
Phone Jack (Micro-Mini) Circular Audio / Power Interconnect (XLR4)
Conductors / Contacts
4 (Tip, Ring 1, Ring 2, Sleeve) 4 Pins
Signal Format
Stereo Audio + Microphone / Video Broadcast Intercom / Balanced Headphone / 12V DC Power
Primary Applications
Pre-smartphone Nokia/mobile headsets, portable AV camcorder break-out Broadcast television intercom headsets, audiophile balanced headphones, field video DC power
Shaft / Plug Diameter
2.5 mm
CTIA Standard Pinout
Tip: Left | Ring 1: Right | Ring 2: Ground | Sleeve: Mic
OMTP Standard Pinout
Tip: Left | Ring 1: Right | Ring 2: Mic | Sleeve: Ground
Intercom Pinout
Pin 1: Mic Gnd | Pin 2: Mic Signal | Pin 3: Phone Return | Pin 4: Phone Signal
Balanced Headphone Pinout
Pin 1: L(+) | Pin 2: L(-) | Pin 3: R(+) | Pin 4: R(-)
DC Power Pinout
Pin 1: 0V / Gnd | Pin 4: +12V DC (Pins 2 & 3 Unused)