# item.guide
Side-by-Side Comparison Jack Connectors

2.5mm TRRS vs. 3.5 mm TRRS

Comparing 2 standards across 7 specifications. 6 key differences identified.

Comparing:
2.5mm TRRS
3.5 mm TRRS

2.5mm TRRS adds a microphone conductor to the 2.5mm TRS jack, following the same CTIA or OMTP wiring conventions as 3.5mm TRRS. It served as a mobile phone headset jack -- including on older Nokia handsets -- before 3.5mm became the universal smartphone headset size.

View full 2.5mm TRRS spec sheet →

3.5mm TRRS connectors transmit stereo audio plus a microphone signal over four conductors. CTIA wiring places ground on Ring 2 and mic on the sleeve; OMTP swaps ground to the sleeve and mic to Ring 2, causing muted or distorted audio when the two are mixed.

View full 3.5 mm TRRS spec sheet →

Specification Comparison Table

7 Parameters
Parameter / Spec
Connector Family
Phone Jack (Micro-Mini) Phone Jack (Mini-Jack)
Shaft / Plug Diameter
2.5 mm 3.5 mm (1/8")
Conductors / Contacts
4 (Tip, Ring 1, Ring 2, Sleeve) 4 (Tip, Ring 1, Ring 2, Sleeve)
Signal Format
Stereo Audio + Microphone / Video Stereo Audio + Microphone / Inline Remote
CTIA Standard Pinout
Tip: Left | Ring 1: Right | Ring 2: Ground | Sleeve: Mic Tip: Left | Ring 1: Right | Ring 2: Ground | Sleeve: Mic (Apple, Android)
OMTP Standard Pinout
Tip: Left | Ring 1: Right | Ring 2: Mic | Sleeve: Ground Tip: Left | Ring 1: Right | Ring 2: Mic | Sleeve: Ground (Legacy EU)
Primary Applications
Pre-smartphone Nokia/mobile headsets, portable AV camcorder break-out Smartphone headsets, gaming headsets, laptops with combo audio/mic jack