# item.guide
Side-by-Side Comparison EV Charging

CCS2 vs. Type 1 (J1772)

Comparing 2 standards across 13 specifications. 13 key differences identified.

Comparing:
CCS2
Type 1 (J1772)

CCS Combo 2 (standardized under IEC 62196-3 and mandated across the European Union) combines the upper 7-pin Type 2 Mennekes inlet with two heavy DC power pins below. Supporting up to 350 kW to 500 kW DC fast-charging (500A @ 1000V DC) alongside native 3-phase AC charging, it is the dominant global fast-charging standard outside North America.

View full CCS2 spec sheet →

The SAE J1772 Connector (standardized as IEC 62196 Type 1, commonly called the J-Plug) is the standard single-phase AC charging interface for electric vehicles across North America and Japan. Featuring a 5-pin circular plug layout with an integrated mechanical top latch, it delivers Level 1 (120V / 16A / 1.9 kW) and Level 2 (208–240V / up to 80A / 19.2 kW) power.

View full Type 1 (J1772) spec sheet →

Specification Comparison Table

13 Parameters
Parameter / Spec
Standardization
IEC 62196-3 / ISO 15118 / DIN 70121 SAE J1772 / IEC 62196-2 (Type 1)
Connector Architecture
Combo inlet: Upper Type 2 socket + Lower 2-pin DC power bus (DC+ / DC-)
Maximum DC Charging Rate
Up to 500 A continuous at 1000 V DC (350 kW standard, up to 500 kW in high-power megawatt systems)
AC Charging Support
Native 3-phase AC up to 22 kW / 43.5 kW when connecting standard Type 2 AC cables
Vehicle Mechanical Interlock
Electromechanical locking pin in car inlet holds heavy liquid-cooled DC cable securely against terminal strain
Global Mandate
Mandatory standard across the EU, UK, Australia, New Zealand, Singapore, India, and Latin America
Tesla European Fleet
All Tesla Model 3, Y, S, and X sold in Europe feature native CCS Combo 2 inlets (and Superchargers feature dual CCS2 cables)
Pin Count & Configuration
5 pins: Line 1 (L1), Neutral/Line 2 (N/L2), Protective Earth (PE), Control Pilot (CP), Proximity Pilot (PP)
AC Phase Support
Single-phase AC only (120V Level 1 or 208-240V Level 2)
Maximum Current & Power
Up to 80 A continuous at 240 V AC (19.2 kW theoretical max; typical home EVSE is 32A to 48A / 7.7 to 11.5 kW)
Signaling / Communication Protocol
1 kHz Pulse Width Modulation (PWM) square wave on Control Pilot pin (+12V open, +9V EV detected, +6V charging)
Mechanical Latch
Spring-loaded thumb release lever with microswitch on Proximity Pilot (terminates current before mechanical disconnect)
Regional Deployment
Standard AC inlet on non-Tesla EVs in North America (pre-2025) and Japan (Nissan Leaf, Toyota Prius Prime, Chevy Bolt)