# item.guide
Side-by-Side Comparison Staples & Clips

26/6 Standard Staple vs. Paper Clips

Comparing 2 standards across 13 specifications. 13 key differences identified.

Comparing:
26/6 Standard Staple
Paper Clips

The 26/6 staple (standardized under DIN 7405) is the most common standard for desktop office staplers worldwide. The numbering designates a 26-gauge wire (approx. 0.40 mm diameter) with a 6 mm (1/4 inch) leg length and a 12.7 mm (1/2 inch) crown width, engineered to fasten 20 to 30 sheets of standard 80 gsm paper.

View full 26/6 Standard Staple spec sheet →

The Gem Paper Clip (introduced by The Gem Manufacturing Company in the 1890s) is a single looped piece of galvanized spring-steel wire that binds loose sheets using torsional elastic deflection. Available in standard No. 1 (33 mm / 1.3 in) and Jumbo (50 mm / 2.0 in) sizes, alongside specialized Butterfly/Trefoil wire clamps for thick 50-sheet reports.

View full Paper Clips spec sheet →

Specification Comparison Table

13 Parameters
Parameter / Spec
Crown Width
12.7 mm (0.50 in / 1/2 in)
Leg Length
6.0 mm (0.24 in / approx. 1/4 in)
Conductor Wire Gauge (AWG)
26 AWG (approx. 0.404 mm / 0.0159 in wire diameter)
Standard Sheet Capacity
20 to 30 sheets (80 gsm bond paper)
Strip Quantity Standard
Full strip (210 staples) or Half strip (105 staples)
Comparison to 24/6
26/6 has thinner wire (0.40 mm) than 24/6 (0.51 mm), providing lower stapling effort on normal stacks
Primary Applications
Universal desktop office staplers (Swingline 747, Bostitch, Rexel, Rapid)
Standard No. 1 Gem Clip
33 mm (1.30 in) length — capacity 10 to 15 sheets (0.8 mm to 0.9 mm wire)
No. 2 Gem Clip
28 mm (1.10 in) length — capacity 5 to 10 sheets
Jumbo Gem Clip
50 mm (2.00 in) length — capacity 20 to 35 sheets (1.0 mm to 1.2 mm wire)
Butterfly / Trefoil Clip
Large circular loops (up to 50 sheets without fiber indentation)
Surface Finishes
Smooth zinc galvanized, vinyl color-coated, serrated 'non-skid' grooves
Elastic Limit Physics
Operates strictly in the steel's elastic zone without permanent plastic deformation