# item.guide
Side-by-Side Comparison Staples & Clips

26/6 Standard Staple vs. No. 10 Mini Staple

Comparing 2 standards across 9 specifications. 9 key differences identified.

Comparing:
26/6 Standard Staple
No. 10 Mini Staple

The 26/6 staple (standardized under DIN 7405) is the most common standard for desktop office staplers worldwide. The numbering designates a 26-gauge wire (approx. 0.40 mm diameter) with a 6 mm (1/4 inch) leg length and a 12.7 mm (1/2 inch) crown width, engineered to fasten 20 to 30 sheets of standard 80 gsm paper.

View full 26/6 Standard Staple spec sheet →

The No. 10 staple (standardized under Japanese JIS S 6036 and international formats as 10-1M) is the premier compact staple format measuring 9.3 mm crown width and 4.8 mm leg length. Engineered for compact, pocket, and ergonomic palm staplers, it is the dominant everyday staple in Japan and across East Asia.

View full No. 10 Mini Staple spec sheet →

Specification Comparison Table

9 Parameters
Parameter / Spec
Crown Width
12.7 mm (0.50 in / 1/2 in) 9.3 mm (0.366 in)
Leg Length
6.0 mm (0.24 in / approx. 1/4 in) 4.8 mm (0.189 in)
Conductor Wire Gauge (AWG)
26 AWG (approx. 0.404 mm / 0.0159 in wire diameter) Approx. 0.50 mm × 0.28 mm flat rolled wire
Standard Sheet Capacity
20 to 30 sheets (80 gsm bond paper) 15 to 20 sheets (64 to 80 gsm paper)
Strip Quantity Standard
Full strip (210 staples) or Half strip (105 staples)
Comparison to 24/6
26/6 has thinner wire (0.40 mm) than 24/6 (0.51 mm), providing lower stapling effort on normal stacks
Primary Applications
Universal desktop office staplers (Swingline 747, Bostitch, Rexel, Rapid)
Strip Length Standard
50 staples per stick (1000 staples per box: 10-1M)
Benchmark Staplers
Max HD-10 series, Kokuyo Power Latch, Plus Flat Clinch mini