# item.guide
Side-by-Side Comparison Tripod & Rigging

ARRI Rosettes & Pins vs. Manfrotto RC2

Comparing 2 standards across 11 specifications. 11 key differences identified.

Comparing:
ARRI Rosettes & Pins
Manfrotto RC2

The ARRI Rosette (31.8 mm diameter with 60 radial teeth and an M6 central thread) and ARRI 3/8"-16 Anti-Twist Locating Pins (dual 3.0 mm indexing holes flanking a 3/8"-16 screw) are the de facto cinema rigging standards developed by Arnold & Richter Cine Technik (ARRI) to prevent camera cage accessories from twisting under heavy rotational torque.

View full ARRI Rosettes & Pins spec sheet →

The Manfrotto RC2 System (utilizing the 200PL rectangular quick-release plate) is the dominant consumer and prosumer quick-release standard in photo/video heads (Manfrotto 496, 498, Befree, 322RC2). Featuring a drop-in tapered aluminum wedge plate with an automatic spring-loaded locking cam and secondary brass safety catch.

View full Manfrotto RC2 spec sheet →

Specification Comparison Table

11 Parameters
Parameter / Spec
Primary Applications
Cinema handgrips (ARRI Alexa, RED, Sony Venice, FX9), extension arms, heavy top handles, monitor arms Manfrotto Befree travel tripods, compact ball heads, 3-way pan/tilt heads, monopod heads
ARRI Rosette Outer Diameter
31.8 mm (1.25 in)
Tooth Configuration
60 radial interlocking teeth (enables precise 6.0° rotational index adjustments)
Rosette Center Bolt
M6 × 1.0 mm internal metric thread (or 1/4"-20 on some consumer cages)
ARRI 3/8"-16 Anti-Twist Pattern
Central 3/8"-16 screw flanked by two 3.0 mm locating pin holes at 15.0 mm spacing
Torque Resistance
Highly resistant to rotational slippage when properly seated, since the teeth physically mesh together rather than relying on friction alone
Plate Model Designation
Manfrotto 200PL (200PL-PRO adds Arca-Swiss side rails)
Plate Dimensions
Approx. 52.0 × 42.0 × 10.0 mm (trapezoidal tapered wedge profile)
Mounting Mechanism
Snap-in auto-locking lever with secondary flip-down brass safety lock lever
Mounting Stud
Captive 1/4"-20 D-ring screw with folding thumbscrew bail
Rubber Anti-Twist Grip
Ribbed synthetic rubber grip pad prevents camera twist under vertical torque