# item.guide
Side-by-Side Comparison Target & Cue

Archery Targets vs. Golf Cup

Comparing 2 standards across 14 specifications. 14 key differences identified.

Comparing:
Archery Targets
Golf Cup

Official target archery dimensions are governed by World Archery (WA Rules Book 3–Target Archery). In Olympic Recurve competition, archers shoot at a distance of 70 m (76.6 yd) at a 122 cm (48.0 in) target face divided into 10 concentric scoring rings across 5 standard colors (Gold, Red, Blue, Black, White). The central 10-ring has a diameter of 12.2 cm, with an inner X-ring of 6.1 cm.

View full Archery Targets spec sheet →

Official golf hole dimensions are governed by the USGA and The R&A (Rules of Golf Rule 1.1 / Equipment Rules Appendix IV). A regulation golf hole must have a diameter of exactly 4.25 in (108.0 mm) and a minimum depth of 4.0 in (101.6 mm). If a cup liner is inserted, the outer diameter of the liner must not exceed 4.25 in, and its top lip must be sunken at least 1.0 in (25.4 mm) below the green putting surface.

View full Golf Cup spec sheet →

Specification Comparison Table

14 Parameters
Parameter / Spec
Olympic Recurve Target Diameter
122.0 cm (48.0 in at 70 m competition distance)
Compound Target Diameter
80.0 cm (31.5 in / 6-ring spot at 50 m distance)
Indoor Archery Target Diameter
40.0 cm (15.75 in at 18 m indoor distance)
122 cm Target 10-Ring Diameter
12.2 cm (4.80 in gold center)
122 cm Target X-Ring Diameter
6.1 cm (2.40 in inner tie-breaker ring)
Target Face Ring Width
6.1 cm (uniform increment per scoring zone on 122 cm)
Target Center Height (from Ground)
130.0 cm (51.2 in ±5 cm to gold center)
Target Butt Incline Angle
10–15 degrees backward tilt from vertical
Hole Diameter
10.80 cm (4.250 in / 107.95 mm strictly enforced)
Minimum Hole Depth
10.16 cm (4.00 in minimum depth into putting green turf)
Cup Liner Recess Depth
2.54 cm (1.00 in minimum below the putting green surface)
Cup Liner Material
Cast Aluminum or Heavy Plastic with Central Flagstick Socket Standard
Flagstick Diameter
1.27–1.90 cm (0.50–0.75 in fiberglass/carbon rod)
Recommended Flagstick Height
2.13 m (7.0 ft / minimum 84.0 in above ground)