24/6 European Staple vs. Prong Paper Fasteners
Comparing 2 standards across 11 specifications. 11 key differences identified.
The 24/6 staple (standardized under DIN 7405) is the primary European office stapler standard, featuring a 24-gauge wire (approx. 0.51 mm diameter) with a 6 mm leg length and 12.7 mm crown width. Utilizing thicker steel wire than 26/6, it provides superior column strength to penetrate dense, high-grammage coated paper without leg buckling.
Two-Prong Metal Paper Fasteners (standardized with a 2.75-inch / 69.85 mm center-to-center prong spacing) are heavy-gauge tin-plated steel compressors used with self-adhesive prong bases inside classification folders, legal case files, and medical patient charts to secure up to 500 hole-punched sheets.
Specification Comparison Table
11 Parameters| Parameter / Spec | ||
|---|---|---|
|
Crown Width
|
12.7 mm (0.50 in) | — |
|
Leg Length
|
6.0 mm (0.24 in) | — |
|
Conductor Wire Gauge (AWG)
|
24 AWG (approx. 0.511 mm / 0.0201 in wire diameter) | — |
|
Standard Sheet Capacity
|
25 to 35 sheets (80 gsm paper) | — |
|
Buckling Resistance
|
+58% greater wire cross-sectional area compared to 26/6 | — |
|
Stapler Compatibility
|
Standard European desk staplers (Novus, Leitz, Rapid, Kangaro marked '24/6–26/6') | — |
|
Center-to-Center Prong Spacing
|
— | 2.75 in (69.85 mm standard) |
|
Standard Prong Capacities
|
— | 1.0 in (approx. 200 sheets) or 2.0 in (approx. 400 to 500 sheets) |
|
Compressor Bar Function
|
— | Slotted steel slide bar locks over prongs and folds prongs flat under tension |
|
Mounting Styles
|
— | Factory heat-bonded to pressboard folder or peel-and-stick self-adhesive base |
|
Primary Applications
|
— | Legal court exhibits, hospital medical records, mortgage closing packets, human resources personnel files |