Side-by-Side Comparison
Metric Threads (ISO)
M10 Thread vs. M8 Thread
Comparing 2 standards across 9 specifications. 9 key differences identified.
Comparing:
M10 Thread
M8 Thread
M10 is an ISO metric machine screw thread with a nominal major diameter of 10.0 mm and a standard coarse pitch of 1.50 mm. Requiring an 8.50 mm tap drill, it is standard in automotive engine mounts, suspension control arms, motorcycle rear-view mirrors, and commercial HVAC hanging brackets.
M8 is an ISO metric machine screw thread with a nominal major diameter of 8.0 mm and a standard coarse pitch of 1.25 mm. Requiring a 6.80 mm tap drill, it is the standard fastener for VESA MIS-F large TV wall mounts (400×400 mm and 600×400 mm), automotive suspension brackets, and heavy furniture.
Specification Comparison Table
9 Parameters| Parameter / Spec | ||
|---|---|---|
|
Nominal Major Diameter
|
10.00 mm | 8.00 mm |
|
Standard Coarse Pitch
|
1.50 mm | 1.25 mm |
|
Minor Diameter (Internal)
|
8.376 mm | 6.647 mm |
|
Tensile Stress Area
|
58.0 mm² | 36.6 mm² |
|
Common Drive Size
|
17mm (ISO) / 16mm (DIN) / 15mm / 8.0mm Allen | 13mm Hex / 6.0mm Allen / T40 / T45 |
|
Fine Pitch (Automotive Standard)
|
1.25 / 1.00 mm | — |
|
Tap Drill Diameter (Coarse)
|
8.50 mm (75% thread engagement) | — |
|
Fine Pitch (Optional)
|
— | 1.00 / 0.75 mm |
|
Tap Drill Diameter
|
— | 6.80 mm (75% thread engagement) |