Side-by-Side Comparison
Lawn & Garden
Garden Hoses vs. Lawn Mower Decks
Comparing 2 standards across 16 specifications. 16 key differences identified.
Comparing:
Garden Hoses
Lawn Mower Decks
Residential garden hoses standardize at 5/8-inch (15.9 mm) inside diameter delivering 10–15 GPM, fitted with 3/4"-11.5 NH Garden Hose Threads (GHT). Lightweight hoses measure 1/2-inch (6–8 GPM), while commercial high-flow hoses measure 3/4-inch (18–22+ GPM).
Lawn mower cutting decks standardize cutting swaths from 21-inch walk-behind push mowers for lots under 1/2 acre to 42–60 inch multi-blade zero-turn decks for acreage, mounting blades via 5-point star, 6-point star, or 5/8-inch round center holes.
Specification Comparison Table
16 Parameters| Parameter / Spec | ||
|---|---|---|
|
Governing Standards
|
ASME B1.20.7 (GHT Threads) / RMA Hose Specifications | ANSI B71.1 (Power Lawn Mowers) / OPEI Specifications |
|
1/2-Inch Hose (12.7 mm ID)
|
Flow: 6–8 GPM (23–30 L/min) | Lightweight for balconies and small yards | — |
|
5/8-Inch Hose (15.9 mm ID)
|
Flow: 10–15 GPM (38–57 L/min) | Universal residential benchmark | — |
|
3/4-Inch Hose (19.1 mm ID)
|
Flow: 18–22+ GPM (68–83 L/min) | Commercial pressure washers & long runs | — |
|
Fitting Thread Standard
|
3/4"-11.5 NH (Garden Hose Thread–GHT) with rubber compression washer | — |
|
Light-Duty Burst Pressure
|
200 to 250 PSI (14–17 bar) | — |
|
Medium-Duty Burst Pressure
|
300 to 400 PSI (21–28 bar) | — |
|
Commercial Heavy-Duty Burst
|
500+ PSI (34+ bar) with crush-proof machined brass couplings | — |
|
21-Inch Walk-Behind Deck
|
— | Cutting width: 21" (53 cm) | Single blade | Lots up to 0.5 acre |
|
30-Inch Wide Walk-Behind
|
— | Cutting width: 30" (76 cm) | Twin timed blades | Lots 0.5 to 1.0 acre |
|
42-Inch Riding / Zero-Turn
|
— | Cutting width: 42" (107 cm) | Twin blades | Properties 1 to 2 acres |
|
48 to 54-Inch Zero-Turn
|
— | Cutting width: 48–54" (122–137 cm) | Triple blades | Properties 2 to 4 acres |
|
60-Inch Commercial Deck
|
— | Cutting width: 60" (152 cm) | Triple blades | Commercial & 4+ acres |
|
5-Point Star Spindle Hole
|
— | Husqvarna / Poulan / Craftsman standard blade mount |
|
6-Point Star Spindle Hole
|
— | MTD / Troy-Bilt / Cub Cadet standard blade mount |
|
Round Spindle Hole
|
— | 5/8-inch (15.9 mm) or 15/16-inch (23.8 mm) universal commercial mount |