Side-by-Side Comparison
Imperial Threads (UNC/UNF)
3/8"-16 UNC vs. #6-32 UNC
Comparing 2 standards across 7 specifications. 7 key differences identified.
Comparing:
3/8"-16 UNC
#6-32 UNC
3/8"-16 UNC is a fractional Unified Coarse machine screw thread with a major diameter of 0.3750 inches (9.525 mm) and 16 threads per inch (TPI). Requiring a 5/16 inch (0.3125 inch) tap drill, it is the international standard for professional photography tripod-to-head mounting studs, cinema camera baseplates, and stage microphone stands.
6-32 UNC is a numbered Unified Coarse machine screw thread with a major diameter of 0.1380 inches (3.505 mm) and 32 threads per inch (TPI). Requiring a #36 (0.1065 inch) tap drill, it is the universal standard for desktop PC case covers, power supplies, 3.5-inch hard drive mounting, and North American electrical wall outlet boxes.
Specification Comparison Table
7 Parameters| Parameter / Spec | ||
|---|---|---|
|
Nominal Major Diameter
|
0.3750 in (9.525 mm) | 0.1380 in (3.505 mm) |
|
Threads Per Inch (TPI)
|
16 TPI (Coarse pitch: 1.588 mm) | 32 TPI (Coarse pitch: 0.794 mm) |
|
Fine Pitch Equivalent
|
3/8"-24 UNF (1.058 mm pitch) | #6-40 UNF (0.635 mm pitch) |
|
Recommended Tap Drill Size
|
5/16 in drill bit (0.3125 in / 7.94 mm) | #36 drill bit (0.1065 in / 2.71 mm) |
|
Minor Diameter (Internal)
|
0.3073 in (7.805 mm) | 0.1042 in (2.647 mm) |
|
Tensile Stress Area
|
0.0775 in² (50.0 mm²) | 0.00909 in² (5.86 mm²) |
|
Common Drive Size
|
9/16" Hex (14.28 mm) / 5/16" Allen | PH2 / 1/4" Hex (6.35 mm) |